Skip to main content
Stesso

Prepare Paint Bucket for Storage

0:25
9:39
54.4K views

At 0:25 in

How to Store Paint Brushes.

Watch on YouTube

What happens here

Begin by taking a paint bucket that contains a used brush and roller. Unroll a sufficient length of 9x400 plastic sheeting, which is inexpensive and readily available. Use a snap knife or razor knife to cut the plastic from the roll. Fold the cut plastic into a manageable shape if needed, then drape it over the top opening of the paint bucket, ensuring it covers the entire opening and extends down the sides. Secure the plastic tightly around the rim of the bucket using painter's tape to create an airtight seal. This method prevents the paint tools from drying out, even overnight or for an entire day.

Goal: To prevent a paint bucket with a brush and roller from drying out, unroll a section of 9x400 plastic sheeting, cut it to size, place it over the bucket, and secure it tightly with painter's tape.

Tools and materials

  • 9x400 Plastic Sheeting
  • Paint Brush
  • Paint Bucket
  • Paint Roller
  • Painter's Tape
  • Snap Knife / Razor Knife

What they say

Hide

So, here we go. I'm going to show you our simple process of how we go about covering a bucket. And all you're going to typically need is we have always have a what we call a snap knife. And this is a sharp razor knife that we use for cutting plastic. And we always got someplace on the job site what we call 9x400 plastic. And and this is a roll of 9x400 plastic. And it's really inexpensive and really cheap to use. And how we go about cutting or covering a bucket is we just take some of this plastic. I just need to take off, roll off as much as I know is going to cover the top of the bucket. And then I'm just going to take and fold that kind of just in a little knot right there. And then just cut that plastic. Now, this plastic is just going to go over the top of my bucket. And I'm just going to use some tape that I have, you know, lying around handy. That's just some typical painters tape. So, I'm just going to set this over the top of the bucket. Hopefully, you can see that right there. Then I'm going to just take some painters tape, wrap it around this bucket. You can see how fast, simple, and easy this is to do. And I just leave my roller and brush right in the bucket. Just wrap it around there so it's nice and snug. And now my bucket is completely covered. Just like that. Pretty simple, easy to

Auto-generated from the video audio.