Remove Unabsorbed Stain

4:05

5:41

228.9K views

At 4:05 in

How to stain or oil a deck professionally. How To Stain A Deck.

Watch on YouTube

What happens here

After the stain has had a few minutes to penetrate (around 5 minutes in less sunny areas), use a clean rag to wipe off any excess stain that has not absorbed into the wood. This step is crucial, especially in shaded areas or on older, less porous wood, to prevent the surface from becoming sticky or tacky once dry. For areas with hard knots or significant wear, more stain might absorb, but any unabsorbed pooling should still be wiped away.

Goal: Prevent tackiness by wiping off any excess, unabsorbed stain.

Tools and materials

Rags — Wiping off excess stain

What they say

(893 characters)

Hide

really fast and you then you won't be able to wipe the excess off with a rag out here in this area. This gets full sun every day. These areas here, see that? be putting some stain on. And this stuff absorbs out here and absorbs fully into the the wood. It's only a few places like where there's hard knots in areas like that where it's not absorbing in. And those areas I'll go back and wipe off. It's absolutely critical that you use a rag to wipe those areas that are pooling and not absorbing because the deck will be extremely tacky for for weeks if you don't do that. And that's with oil based products, penetrating oil stains, water-based products will typically will just dry and they create a top coat. I just continue working along the deck and out here in the sun. You can see it's absorbs really well into the deck. But there's any areas puddling, just wipe them off just like that.

Auto-generated from the video audio.