Spray Window Sill and Inspect for Coverage

it without putting an extension on. I'll do my first, you know, window and we'll see what happens, you know, from there. So, you once I get that done, then I come back, I'll come across, you know, the face here. I'll hit the edge and then I'll hit my seal twice. So I hit my seal twice cuz it's a horizontal surface and the product will, you know, level out really really well. Now that's, you know, the system that I, you know, adopted for spraying windows cuz, you know, for instance, if I came up, you know, sprayed up and I came across and sprayed across, I have a spot that overlapped twice right there. And those overlaps are um potential run spots. So I'm trying to eliminate overlaps. So the system that I developed, you eventually just have overlaps down here. You don't have overlaps in the corners. But up top, you do have this part that's sticking out. So as I come across, I'm going to have to like, you know, hit that portion cuz that sticks out like pretty pretty far. So that would be were you possibly using you know a 510 10 510 tip. You know it would span that corn that turn when I actually made that turn. But this is this it's been a long time since I shot a you know full wrap window. Uh you know just to be transparent you know right here in this video. So we're going to see you know how this goes. Um the last house I just shot, you know, it was all the windows were just um sill wrapped. So here we go. We're going to, you know, uh shoot with this window. Typically when I'm