Begin Spraying and Observe Safety

gun the tip of the gun I want that in water I don't want my gun submerged in water I just want the tip in water one of the reasons why I use an extension it's in there if I'm not going to be using it for any period of time you want to take and just turn it to the off position and then you also want to release the pressure on the pump this is your Prime tube you don't ever want to release the pressure on this Prime tube CU there's a lot of pressure behind this thing if you're running it like 25 P 2500 PSI there's 2500 PSI pounds per square inch you know in this machine that's going to release out this tube but if you hit this thing to Prime with all that pressure in there this tube's going to come flying out could hit you in the face it could shoot paint everywhere take this Prime tube hold on to it point it down into your water or your paint stick it to Prime and it releases all your pressure all the pressure is released I'm going to stick it back to spray cuz I'll be spraying here pretty soon so I've now I've loading my um airless sprayer up with paint I've just put my intake tube into my paint you could take your Prime tube and put it down into the paint also I typically always put my Prime tube in a separate bucket of water that's the way I like to do loaded it up with fresh clean water it was already primed with water so all I had to do is stick my intake tube into my paint I didn't have to reime it now I'm just going to run all the water out of it as soon as you see paint coming out of it now paint just started to come out of it I'm going to go into my paint now I'm going to start cycling the paint through the hose and just make sure there's no air bubbles in it so now there's no air bubbles in it I'm ready to spray make sure when you put your tip and guard on guns on safe don't put your hand anywhere in front of