Skip to main content
Stesso

Precise Flow Coat Mixing Technique

1:11
4:38
1.1M views

At 1:11 in

How to Resurface Concrete for Beginners Part 2 $660 DIY Driveway repair / restoration project

Watch on YouTube

What happens here

To achieve a consistent mix and make your job easier, follow a specific water-to-material ratio. First, add approximately three quarts of water into your mixing bucket. Then, add the 40-pound bag of Flow Coat material. Finally, add the remaining half a quart of water. Precision in measuring the water quantity is paramount for consistency across the entire project; avoid relying on guesswork.

Goal: Achieve consistent Flow Coat mixture for the entire project.

Tools and materials

  • Measuring container — Accurately measuring water
  • Milwaukee Cordless Drill Milwaukee — Attempted mixing, but not recommended due to excessive torque and lack of control
  • Milwaukee Mud Mixer Milwaukee — Mixing the Flow Coat efficiently and with stable control
  • Mixing bucket — Holding and mixing Flow Coat
  • Water — Mixing with Flow Coat

What they say

Hide

material evenly. Once your coloring is thoroughly mixed into the water, then you can add flow coat. Here's a tip to make your life easier. First, add three quarts of water into the bucket. Then, add your material. And then add your last half a quart of water. When you're mixing your flow coat, precision with your water is key to get consistency over the entire project. Don't go by feel. Measure out your water quantity.

Auto-generated from the video audio.