Apply Adhesive and Install New Gasket

to try again here we're going to press it into place and we're going to take a clamp and put on each corner the instructions definitely did not allude to the fact that this stuff will not hold the rope in place okay well it's starting - all right so each corner each corner here is going to require it's going to require me to do that so pressing it into place kind of stretching and placing it in there not fun not cool not easy okay so we've got a clamp here clamp here we'll have to do another clamp down here once I can get it into place what a pain in the butt didn't say anything about having to clamp anything in place the adhesive really doesn't hold too tight learn from me guys press that into place there are another clamp on guys I hope you're learning something from me here if you're replacing the wood stove seal like me it's not gonna be easy the Rope doesn't hold in place with the glue okay so when you get ready to use this glue use it excessively I don't want to make a mess that's why I was kind of light on the glue at first but I think you got to really use it use this glue excessively excuse me says to put 1/8 inch bead of gasket adhesive around it but that's not going to cut it so we had to clamp everything in place I think I'm gonna have to come back and do the other door because I'm all out of clamps you know I have other clamps but hmm I didn't expect this for sure wear gloves when you're doing this this is a messy job when I press this in I can hear the glue kind of mushing in there popping well folks I think you can see how it goes into place I've got it clamped in place on this door right here we're gonna let it set up we're gonna let it dry I'm gonna do the same process for the other door and that's basically it we're just replacing this gasket right here just in case you're trying to take on this project by yourself if you're replacing the seal on your wood stove and I know probably a lot of folks are thinking man I really should do that on my wood stove just understand that this glue doesn't hold it in place so have some clamps ready to rock and roll I was lucky I had clamps just sitting right over here but the glue doesn't really hold it in place so well so when you first put it in there it just falls right back out so just a piece of information that you'll need I'm gonna go ahead and start working on the other door I'm gonna put the glue in and I'm gonna wait a few minutes before I compress this flame-retardant rope in there and we'll…