Clean Intake Tube and Prime Tube

What happens here

Once the initial flushing is complete, it's crucial to thoroughly clean the intake tube. Lift it out of the clean water bucket and use your hands to wipe away any remaining paint residue from its exterior and interior if accessible. You want this tube to be completely free of dried paint. Next, direct the prime tube into the dirty water bucket. Actively hold the prime tube to prevent it from flying out due to pressure. Engage the sprayer to run clean water through the prime tube. If paint was run through the prime tube during operation, ensure clean water is flushed until all paint is clear. You will alternate running water through the prime tube and through the spray gun to ensure both lines are thoroughly cleaned.

Goal: Clean any residual paint from the intake tube manually and then flush the prime tube by running clean water through it, alternating with gun flushing.