Set Spray Pressure and Pre-Spray for Dust

What happens here

Set the airless sprayer's pressure to 2200 PSI for all trim components, including baseboards, door jambs, and window sills. It's recommended to use a pressure gauge directly at the sprayer to accurately monitor and ensure the correct pressure is maintained throughout the job. If there is any dust or debris remaining after vacuuming, perform a brief 'pre-spray' around the room by directing the spray gun towards the floor or a protected area near the trim to work residual dust away from the surfaces that will be painted.

Goal: Optimize spray pressure and minimize dust contamination before applying paint.