Ensure Ladder Safety and Stability

of this video. I'm going to give you one more tip when it comes to doing ceiling cutins. And this is how I actually stand on a ladder when I'm doing my cutins. And when I'm doing my cutins, I'm typically using either a 6ft ladder or a 3-FFT ladder. But I always want to have the ladder or typically always have the ladder. I'm going walk up it at an angle like this. And I like to actually do my cutins with the ladder right here. So I can face the ladder and lean up against the ladder and have myself supported. It is a lot harder to do your cutins this way and not have the support of the ladder in case you tilt forward and fall forward. Sometimes in the videos I got to do it just to for video purposes stand the opposite direction, but it'll make you a lot more secure on the ladder to actually be facing the ladder and doing your cut ends that way. So once again, I'm going to load up my brush, pat it on the side, going to bring my brush up to my cut in. I'm going to work about a foot section. Go back. Work the opposite direction. Then I'm going to load up my brush, pat it on the side, bring it up to the ceiling, cut it one direction. I'm going to cut it back the opposite direction. Going to load it up one more time. Going to bring it up to the ceiling. cut it. There's these little spots I missed from the first cut. So, I go back, cut the opposite direction. Now, I'm going to once again fill it in with my roller. Get that 4-in roller as close as you can to the ceiling. About a half an inch from the ceiling. And there you have it.