Mask Off All Areas Not To Be Painted

we do when we're prepping a house. Now, on the painting day, you got to mask off your house to get it all ready to paint. So, we're going to walk you through some of the masking steps and what we actually mask before spraying. So, stay tuned. Here we go. So, I got a house here. Going to walk you through what we actually mask with plastic and what we actually mask with paper. show you some of the masking we have. We got we take put paper masking 9 in paper on any roof lines so we don't get on any overspray on the roofs. We're going to take and put drop cloths on those areas too. But you can see the masking on the roof. We mask all the windows off so we don't get overspray on the windows. We mask garage doors um on the ground so when we actually spray the garage door, we don't get overspray on the garage doors. They mask off any brick or rock so we don't get any overspray on brick and rock. And typically all the masking we're using is 9in paper with 1 in 2020 20 tape around any light fixtures, any electrical outlets, anything that can get overspray. These are your vents, but we'll typically mask them so they'll look nice, crisp, and clean and match the house. We got same over here. Here we got masking on windows. We've got a vinyl fence that we've masked 9 in paper to keep the overspray off the vinyl fence. We've got two doors in the back that we've masked off. We're going to be spraying these doors. So, we've masked them off so we don't get overspray on the doors. Got the thresholds masked. [Music] Going to fill it in with my 3M 2020 tape. It's cheaper. Frog tape's about $5 a roll. The 3M 2020 tape's about a dollar a roll. Now, the