Skip to main content
Stesso

Thread and Engage the Masker's Guide

0:56
2:46
15.8K views

At 0:56 in

How to load a 3M Hand Masker with a straight cut blade.

Watch on YouTube

What happens here

The tape is guided underneath the small pin that sticks out, ensuring it's properly positioned. The plastic film is then placed over the top of the tape. Both the tape and plastic are run together underneath the main guide of the masker. Once threaded, pull out a small length of the combined tape and film to confirm correct loading.

Goal: This step involves threading the painter's tape underneath the guide pin and placing the plastic film over the tape, then running both through the tool's guide for a combined, precise application.

Tools and materials

  • 3M M3000 Hand-Masker

What they say

Hide

I'm going to take my roller tape, roller tape is going to come over the top, so tape comes over the top. I'm just going to slide that on, make sure it's on all the way. Now your tape just comes underneath the pen that's sticking out right there. I'm going to set it on top, my plastic, run it underneath the guide right here. I'm going to pull it out. Now everything's set, ready to go, other than my stabilizer right here, I'm going to push

Auto-generated from the video audio.