Wire and Program the Control Box

What happens here

Connect all the color-coded wires from the gate opener arm, the solar panels, and the battery to the circuit board inside the control box. Ensure all wires are fed through the grommets. The instructions provide a clear wiring diagram for each connection point, making the process straightforward. Once all wires are connected, push the circuit board back into place and secure it with its screws. Then, learn the remote control by pressing the 'RF Learn' button on the circuit board for two seconds until the LED illuminates, and then pressing a button on the remote. The LED will blink twice to confirm pairing. The gate opener will then begin its self-learning cycle, moving the gate through its full open and close range. The gate operates slowly, which is beneficial for safety and longevity.

Goal: Electrically connect components and program the remote control