Commissioning and Finalization

6:28

7:17

27.2K views

At 6:28 in

HOW TO INSTALL A TESLA WALL CONNECTOR UNIVERSAL IN LESS THAN 10 MINUTES!

Watch on YouTube

What happens here

With the Tesla Wall Connector physically installed and wired, the electrician prepares to commission the unit. He mentions that since a 50 amp circuit breaker was installed, the charger will be commissioned to deliver 40 amps continuous charging, which adheres to the 80% rule for continuous electrical loads (50 amps * 0.80 = 40 amps). The video shows the electrician neatly wrapping the charging cable around the charger's integrated holster for storage. The Tesla Wall Connector has an indicator light that illuminates once commissioned, signaling that it is operational. After successfully commissioning the charger, the electrician packs up his tools and concludes the installation.

Goal: Activate the EV charger, configure its charging capacity, and tidy up the installation.

Tools and materials

Cord Holster Tesla — Storing the charging cable neatly when not in use
Tesla Wall Connector Universal Tesla — The newly installed electric vehicle charger

What they say

(683 characters)

Hide

everybody. So here's a recap what we've done. So, we got our 62 ROMX wire in the wall and drilled through the studs. And here is the electrical panel, everybody. We have our 50 amp circuit breaker installed right here. I'm actually pointing at it right now. And guys, it is finished. And we are lastly just about to commission the EV charger. And once you commission it, since we did a 50 amp circuit breaker, we commissioned it to 40 40 amps continuous amps because it has to be 80% whatever the circuit breaker is. I'm putting my tools away. And guys, yeah, that's pretty much it. That is what electric vehicle charger Tesla wall connector universal installation looks like. Peace.

Auto-generated from the video audio.