Skip to main content
Stesso

Test Strong Gate Bracing (Compression)

0:10
0:45
2.4M views

At 0:10 in

How to frame a gate! 💪 also talking about gate cables. #gate #framing #test

Watch on YouTube

What happens here

Next, re-position the diagonal wooden brace within the gate frame to the opposite and correct orientation for compression. This means the brace should run from the lower hinge-side corner (where the gate is supported) diagonally upwards to the upper latch-side corner (where the gate is most prone to sagging). The demonstrator then repeats the strength test by standing on the bottom rail of the gate frame, applying his full body weight. This time, the gate frame exhibits significantly greater stability with minimal deflection, clearly demonstrating the superior strength provided by a compression brace.

Goal: Demonstrate the enhanced stability of a compression-braced wooden gate frame.

Tools and materials

  • Cordless Impact Driver DeWalt — Used to simulate fastening the brace in the correct orientation
  • Diagonal Wooden Brace — The structural element being tested in the compression orientation
  • Wooden Gate Frame — The primary structure being re-tested with the correct bracing
  • Wood Screws — To fasten the brace (simulated)

What they say

Hide

We got another test. Gate frame this direction or this direction? The reason this is stronger is because this corner pushes down and compresses at the bottom of the structure. In this case, the pressure down relies on the top of the structure, which is usually

Auto-generated from the video audio.