Skip to main content
Stesso

How to frame a gate! 💪 also talking about gate cables. #gate #framing #test

0:45
2.4M views

Video by BAS Renovations

BAS Renovations

Watch on YouTube

What happens here

This project provides an instructional demonstration on how to correctly install a diagonal brace on a wooden gate frame to maximize its structural strength and prevent future sagging. The video contrasts two bracing orientations, highlighting why a compression brace is superior for wooden gate applications over a tension brace, especially when counteracting gravity. It also offers advice on properly cutting the ends of the brace for optimal fit.

Transcript

Hide

We got another test. Gate frame this direction or this direction? The reason this is stronger is because this corner pushes down and compresses at the bottom of the structure. In this case, the pressure down relies on the top of the structure, which is usually not as strong, and it requires this to have tension, not compression. If you're using cable, this is the right direction because so you're counting on using it to pull it up. You can cut it either this way or this way, but I would say this way locks it in better. Comment and tell me how you frame your gates.

Auto-generated from the video audio.