Assemble Shelf Frame

1:40

5:01

76.7K views

At 1:40 in

How to Build Floating shelf

Watch on YouTube

What happens here

Apply a generous but not excessive amount of wood glue to the 45-degree mitered edges of the front and side pieces. Carefully bring the pieces together to form a U-shaped frame. Use bar clamps (also known as pipe clamps) and quick clamps to apply even pressure across all joints. Ensure the pieces are flush and tightly butted against each other. The video emphasizes using only glue for this step, though brad nails can be used for extra security if you prefer, then filled later. Allow ample drying time for the glue to cure, which is critical for the structural integrity of the shelf.

Goal: Carefully apply wood glue to the mitered edges and assemble the front and side pieces into a U-shaped frame. Secure the joints with clamps and allow the glue to dry completely to form a strong, seamless bond.

Tools and materials

Bar Clamps / Pipe Clamps
Brad Nailer (Optional)
Quick Clamps
Wood Glue Titebond

What they say

(902 characters)

Hide

[Music] exact. All right, here's the moment of truth. Honestly, glue-ups are some of the most stressful processes out there. We're going to use all wood, all glue. We're not going to use any kind of nails. Feel free, if you don't feel comfortable doing that, using a few brad nails. Um, brad nails are the skinny one. They don't have a cap to them. They're nice and concealed. And in the end, you can just put a couple of dabs of wood filler and sand it all down. Um, the reason I didn't go with the brad nail in this particular situation is I got rid of my brad nail gun and now I kind of regret it. But not to stress, this process went along just fine. [Music] When it comes to start clamping all the things, shy away from tightening your pieces way too hard. Squeezing too tight will deprive all the pieces of glue. Squeezing too little would prevent all the pieces from joining. Find a good between

Auto-generated from the video audio.