Skip to main content
Stesso

Final Scraping and Sanding

2:46
3:41
9.7K views

At 2:46 in

How Painters Can Epoxy Garage Floors Without Expensive Equipment

Watch on YouTube

What happens here

After the second flake coat has cured, repeat the scraping process to remove any loose or vertically protruding flakes. Following the scraping, lightly sand the entire surface of the floor with an orbital sander to smooth down any remaining sharp edges of the flakes. Vacuum the floor thoroughly to remove all dust and debris, ensuring a clean surface for the final top coat.

Goal: Smooth the flake surface and prepare for the final top coat.

Tools and materials

  • Orbital Sander — Smoothing down standing mica flakes
  • Protective Gloves Milwaukee — Protecting hands during scraping and sanding
  • Sandpaper — For the orbital sander, typically 80-120 grit
  • Shop Vacuum — Cleaning up dust and debris
  • Stiff Broom or Floor Scraper — Removing loose flakes

What they say

Hide

dried. We did our scraping once again. Um scraping three different directions. Our final uh top coat is Poly1 HD UDP.

Auto-generated from the video audio.