Install Weatherhead and Create Drip Loop
At 1:04 in
How installing a 200 AMP Service looks like in New Jersey for a Resi Home,Prepping the Wire #advice
What happens here
Install the weatherhead onto the prepared service entrance cable. Weatherheads are typically press-fit and may require careful prying with a screwdriver to open slightly, allowing the cable to slide in. Ensure the weatherhead is oriented correctly to direct water away from the service. Slide all three conductors (two hot, one neutral) through the designated openings in the weatherhead. Once the cable is through, create a 90-degree bend, also known as a 'drip loop,' with the wires before they enter the weatherhead. This ensures any water running down the wires drips off before entering the electrical system. Finally, tighten the clamp on the weatherhead using a screwdriver to secure it firmly to the cable.
Goal: Attach the weatherhead and form a drip loop for water protection.
Tools and materials
- Screwdriver — Prying open the weatherhead and tightening its clamp
- Service Entrance Cable — The cable integrated with the weatherhead
- Weatherhead — Protecting the service entrance cable from weather and directing water away
What they say
(892 characters)Hide
What they say
(892 characters)Auto-generated from the video audio.