Install Tiles on Hearth and Surround

and we'll start spreading it out [Music] one of the most important parts here on the bottom is making sure that this is perfectly flush whoa why are you making me use that one out there making me stay stay out in the cold using water so let's say you need to cut a circle in tile which for my situation i have the cable coming out there they sell these little kits place it where you want to be remove the double-sided sticky tape place it in the back of the guide place it right where you need it as you can see put some water in there to keep the friction down start this at a lower rpm dive it in uh kind of cutting it into a corner and then start straightening it out carefully pry this off and there we have it perfect circle finally made it to the upper deck here we're gonna start working our way out do the trim piece lay everything forward [Music] moving up let's go [Music] folks we're doing the ledge the way we're doing the ledge is we got these transition pieces that are beveled we're going to do three inches on the inside first and then we're going to take this prefabricated transition piece and cap it we have to cut a bunch of those pieces again three inches deep i need if my calculations are right about 34 pieces so i'm gonna just slice and dice baby [Music] you guys want to see how cold it is look i have frost on my hairs on my hands that's how cold is that's how cold my hands are right now [Music] man that's coming out good oh so good [Music] now remember guys i'm not a tile guy i'm just diy guy with a youtube channel so don't start judging me as oh you should have done that listen saving a bunch of money by doing myself and it looks too wide i think is pretty okay [Music] all right last part of the tile setup is doing the front faces here like i said