Skip to main content
Stesso

Understanding Header Support Components

0:09
1:58
31.4K views

At 0:09 in

Headers explained 💪

Watch on YouTube

What happens here

This step details the support structure for headers. Jack studs are explained as the primary vertical supports directly beneath the header. The number of jack studs required varies based on the header's span and the load it must bear, with a minimum of one per opening. King studs are full-height studs running from the bottom plate to the double top plate, flanking the jack studs. Cripple studs are shorter vertical studs positioned between the double top plate and the header, designed to transfer weight from the double top plate down to the header.

Goal: Identify and understand the function of jack, king, and cripple studs.

Tools and materials

  • Miniature Framing Model N/A — Visualizing jack studs, king studs, and cripple studs
  • Pointer Tool N/A — Highlighting specific components on the model

What they say

Hide

Your jumper is held up by support posts. Depending on the width of the span and the weight carried by the lintel, the number of required support posts is determined. For any opening, you will always have at least one support post. The main strut goes from the lower strap to the double upper strap. This is where the short racks are located. They help transfer weight from the double top strap to the jumper. These joists usually

Auto-generated from the video audio.