Skip to main content
Stesso

Header Material Construction

0:33
1:58
31.4K views

At 0:33 in

Headers explained šŸ’Ŗ

Watch on YouTube

What happens here

Headers are typically constructed from multiple pieces of lumber. This step demonstrates that headers are usually 'double' or 'triple' 2x material (e.g., two 2x4s or three 2x6s), depending on the wall's thickness (2x4 or 2x6 walls). Plywood or OSB is often used as a spacer between the lumber pieces to achieve the correct wall thickness. For instance, a 2x6 wall would typically use two pieces of plywood sandwiched between three 2x material members.

Goal: Learn about the materials used to construct headers.

Tools and materials

  • Miniature Framing Model N/A ā€” Showing header material configuration
  • Plywood/OSB Pieces N/A ā€” Representing spacer material between header lumber
  • Wood Blocks ā€” Representing the main header lumber

What they say

Hide

This is where the short racks are located. They help transfer weight from the double top strap to the jumper. These joists usually consist of two or three boards, depending on the thickness of the wall (2x4 or 2x6), with plywood laid between them . If the wall is 2x6, you will have two sheets of plywood sandwiched between three boards. These are standard jumper sizes. This is not always the case, depending on the situation, but it is a good general basis. If the opening is

Auto-generated from the video audio.