Prepare Spray Equipment and Primer

were brand new and factory done. Here's our airless sprayer sitting here. We're bond doing our DTM bonding primer. Our gutters got our airless sprayer set up almost full pressure. Our bonding primer is in a 5gallon bucket so it doesn't tip over. Has more stable. We don't want it spilling. So, it's in our side our five gallon bucket and showing you what we're doing. Getting ready to top coat them to look at it inside our five gallon bucket. Hopefully, you can read that. Our protective and marine coatings DTM bonding primer from Sheron Williams. If you'd like to see any of our previous gutter videos, I got a handful of them out there teaching you. You'll see us using some spray wands and some gun extensions spraying gutters. You can check out some of my I got one video right here and another video right here doing gutters and downspouts. Go check out those videos once you're done watching this video. So, some of the simple tools that you want to have handy when you're actually spraying these gutters. I've got myself a hand masker right here with uh 9in paper, 1in tape. I got my gun with two extensions hooked up on it. These are two, one of them is a 24 inch extension and another one's an 18inch extension. Using a 310 tip with my airless sprayer right here. Also use quite a bit my um cardboard shield holder and I got one that actually easily adjust and cuz I'm constantly moving it back and forth at different angles to to spray the shutters and control my overspray. So, we're just cruising right along here spraying our top coat on them. We sprayed our bonding primer on it about an hour ago. It's already dry and now we're top coating them right now with our white top coat Resilience from Sheran Williams. Another look at our