Skip to main content
Stesso

Configuring Airless Spray Equipment

0:50
4:37
185.5K views

At 0:50 in

GUTTER PAINTING TIPS. Rain Gutter Painting Instructions. How To Paint Gutters.

Watch on YouTube

What happens here

This step focuses on configuring the spray equipment for efficient and high-quality application. Multiple spray gun extensions are used to reach the gutters from the ground, minimizing the need for ladders and preventing 'start and stop' marks that can occur when moving ladders. A 310 fine finish spray tip is employed with a Titan 440i airless sprayer, set at typically high pressure (around 2800 PSI or slightly under). The objective is to spray the full length of the gutter in one pass where possible to achieve a seamless, factory-like finish.

Goal: The presenter describes the specific airless spray gun setup, including the use of multiple extensions, a fine finish spray tip, and appropriate pressure settings, to achieve a factory-like finish without using ladders extensively.

Tools and materials

  • 310 Fine Finish Spray Tip
  • Spray Gun Extensions
  • Titan 440i Airless Sprayer

What they say

Hide

But you'll see us using multiple extensions so we can reach and spray those gutters so they'll look like a factory finish. We're using a 310 fine finish uh spray tip with a Titan 440i sprayer set at typically high pressure or just a little bit under that which is around 2,800 PSI. So, we want to use those extensions so we don't have to climb up and down ladders and get start and stops on our gutters. We're going to try to shoot them wherever we can the full length of the gutter so you don't get any spits or starts and stops on them. So, just watch our techniques while we're spraying these gutters. So, your gutters will look just like they were brand new and factory done.

Auto-generated from the video audio.