Skip to main content
Stesso

Temporarily Secure Bottom Plate

0:00
0:24
145.9K views

At 0:00 in

Great Tips! Full video on Channel 👍 #shed #framing

Watch on YouTube

What happens here

Before raising the pre-framed wall, temporarily secure its bottom plate to the subfloor. The video implies marking guidelines, likely 3.5 inches in from the subfloor's edges to align with the center of a common wall framing width. Using a Milwaukee Fuel Brushless nail gun, drive nails through the bottom plate into the subfloor. This temporary fastening prevents the wall from shifting or sliding when it is lifted into its vertical position.

Goal: Prevent wall movement during erection

Tools and materials

  • Chalk Line — Marking alignment lines on the subfloor (implied)
  • Measuring Tape — Measuring distances for chalk lines (implied)
  • Nail Gun Milwaukee Fuel Brushless — Driving nails to fasten the bottom plate
  • Nails — Temporarily fastening the bottom plate to the subfloor
  • Bottom Plate — The base component of the framed wall
  • Subfloor — The surface to which the wall is temporarily attached

What they say

Hide

Snap lines 3 and 1/2 inches from all your edges, and then you can nail it like I'm showing here. So, when you stand up your wall, it doesn't move on you. Install a side brace, so when you get it up, you can move it over and get it set right where you want to. And then it's easy to move it if you just put one nail in it.

Auto-generated from the video audio.