Erect Wall and Install Side Brace

What happens here

After the bottom plate is secured, carefully lift the pre-framed wall from its horizontal position on the subfloor into its vertical position. To provide temporary stability and allow for precise positioning, install a diagonal brace, typically a 2x4 piece of lumber. Attach one end of this brace to a stud near the top of the framed wall and the other end to the subfloor, securing each end with only one nail. This single-nail attachment allows the brace to pivot, making it easy to fine-tune the wall's plumb (vertical straightness) and position. The video shows the use of a long spirit level to check the vertical alignment of the wall.

Goal: Stabilize and position the framed wall