Lift and Position Sheathing

What happens here

Once the wooden block is secured to the sheathing panel, obtain a suitably sized 2x4 lumber piece that is long enough to provide good leverage. Position the bottom edge of the sheathing panel against the wall frame where it needs to be installed. Place one end of the 2x4 under the previously attached wooden block. Use the ground or a stable part of the wall frame as a fulcrum for the 2x4. Apply downward pressure on the opposite end of the 2x4, effectively using it as a lever to lift the sheathing panel upwards. Guide the panel carefully to align it with the top plate of the wall and any adjacent panels.

Goal: Raise the sheathing panel into its final aligned position.