Skip to main content

Final Cleaning and Apply Additional Coats

9:48
15:31
233K views

At 9:48 in

GRAIN Filler for Cabinets.... Aqua Coat Wood Grain Filler

What happens here

After sanding the AquaCoat, thoroughly wipe down the cabinet surface with a clean microfiber towel to remove all fine dust. It is advisable to have two rags: one for initial wiping and another clean one for a final pass, ensuring no contaminants are left behind that could affect the final coat's smoothness. If any areas still show visible grain after sanding, another thin coat of AquaCoat may be applied. The presenter demonstrates applying a final coat to a shelf and a door.

Tools and materials

  • AquaCoat Cabinet Grain Filler
  • Flexible Squeegees (Assorted Sizes)
  • Microfiber Towels (2)
  • Raven Disposable Rubber Gloves
  • AquaCoat-coated Cabinet Door or Shelf

What they say

Hide

coat on with our final coat of aqua coat I'm just gonna dust off my surface now if you don't dust it off you can get contaminants mixed in with your aqua coat and you know it could not be nice and smooth application kind of gets in there and it gets a little bit grainy so I'm gonna wipe that down it's good idea to have yo two rags with you and I'll apply my final coat getting into summer like really hard areas say if I would have this panel right here cocked because sometimes we do caulk our panels if I needed to get in corners sometimes I'll just use something just like my finger just to rub it down in there but you don't want to leave a whole lot behind it does sand you'll fairly easily but the more you leave behind the more you're gonna have to sand you're really just after filling mixed beings or your grain so I'm gonna apply my final coat got my whole assortment of trowels here here's my hot cocoa well will do with the large one here first eye here we go I'm going to apply it so I can apply take it out I can apply it on with a small trowel and then spread it with a large crowd to make the process a little bit faster this is looking really good and it feels now absolutely glassy smooth now this is gonna look absolutely beautiful when done sometimes I like just going u'll across the grain instead of with the grain it seems like it has a tendency to fill a little bit better so we got like our routed edges here you can just rub it with my rag it's looking really nice so that one looks really good wipe off the excess on my edges here I'm gonna do this door show you one last door final coat on this door let's get all work you know from inside out so I'm gonna work on my top panel here this does stuff doesn't have a strong odor at all so you don't need to wear a respirator it's gonna barely smell it down inside the the raised portion it looks looks like it's fairly filled but I can use you know that to get in there I can use your little trowel like this to get down in there just go look around search around it's kind of interesting where you can find little trials like this this was this one right here came from the guys that did the window tinting on my vehicle they were doing it I said hey can I have one of those and they gave one to me same with this one here once again you can apply it down in there with a rag too I can just but you just don't use too much because you don't want to get it where you don't want it like I don't want it down in the edges of…

Auto-generated from the video audio.