Skip to main content
Stesso

Remove Old Trigger Mechanism

3:17
6:48
20.9K views

At 3:17 in

Graco Repairs FASTl. Repair your Graco Contractor PC Gun Fast!

Watch on YouTube

What happens here

With the retaining clips removed, the trigger mechanism is now free to slide off. To do this, slide the trigger forward while simultaneously pressing on the internal springs and holding the push-buttons with your fingers. This careful technique is crucial to prevent the small components (springs and push-buttons) from flying out and getting lost. Once the trigger is slid past the internal mechanism, it can be fully removed from the gun's body.

Goal: After removing the retaining clips, the old trigger is removed by sliding it forward while carefully holding the internal springs and push-buttons to prevent them from scattering.

Tools and materials

  • Old trigger
  • Paint Spray Gun (Graco Contractor PC)
  • Push-buttons
  • Springs

What they say

Hide

got to be careful because it just flipped off right there and you want to be someplace where you know you can catch it and now the gun the trigger on the gun is free to slide off now i'm going to slide this thing forward i'm going to have these springs i'm going to push them make sure i push on them slide it forward and i'm going to have my fingers right here because i don't want the spring mechanism to go popping out of here and flying somewhere where i can't find it so i'm catching it right here i'm going to slide the trigger forward i'm going to set this now release the spring set it down and it comes right out if you don't have both fingers on both sides it's going to

Auto-generated from the video audio.