Secure New Wheels and Lower Vehicle

What happens here

After all the new wheels are hand-tightened, use the lug wrench to snug the lug nuts in a star pattern (e.g., 5-point for 5 lugs, 6-point for 6 lugs) to ensure the wheel is seated evenly, but do not fully torque them yet. Then, carefully lower the GMC truck from the jack stands using the floor jack until it is fully on the ground. Once the truck's full weight is on the wheels, use a torque wrench to tighten each lug nut to the manufacturer's specified torque setting (typically found in the owner's manual). This ensures the wheels are securely fastened and prevents them from coming loose or being overtightened, which can damage the studs. Repeat this process for all four wheels. Finally, remove all tools and clean up the work area.

Goal: Safely secure the new wheels to the truck and return the vehicle to the ground.