Final Inspection and Spot Treatment

What happens here

After applying multiple coats of Aqua Coat and sanding, it's critical to inspect the surface for any missed spots or remaining grain. Turn on a bright inspection light, such as an LED strip light, and examine the cabinet surfaces from different angles. This will reveal any imperfections, like subtle grain patterns that weren't fully filled or areas where too much product was removed during sanding. Address these areas by applying a targeted spot application of Aqua Coat and allowing it to dry before re-sanding. The presenter shows an example where a missed spot on an edge is visible under the inspection light.

Goal: Identify and correct any remaining imperfections before the final painting stage.