Surface Preparation (De-glossing Existing Flake Floor)
0:00
1:02
12.9K views
At 0:00 in
Garage floor coating with the The Idaho Painter! Sanding Torginol mica flakes with my Ekasand.
What happens here
The first step is to prepare the existing flaked epoxy surface for the new clear topcoat. A person is shown on their knees, using a random orbital sander attached to a shop vacuum, to lightly sand the floor along the edges and corners. This process, known as 'de-glossing' or 'etching,' creates a mechanical profile on the smooth surface, which is essential for the new topcoat to properly adhere. The vacuum attachment minimizes dust during this crucial preparation phase. Ensure all areas, especially edges, are adequately abraded.
Goal: Create a proper adhesion profile on the existing flaked epoxy floor
Tools and materials
- Dust Mask/Respirator Unspecified — Protecting respiratory system from dust and chemical fumes
- Knee Pads Ergo — Protecting knees during extended work on the floor
- Random Orbital Sander Unspecified — Lightly abrading the existing floor surface for better adhesion
- Safety Glasses Unspecified — Protecting eyes from dust and splashes
- Sanding Pad/Discs Unspecified — Abrasive material for scuffing the floor surface
- Shop Vacuum Unspecified — Connecting to the sander to collect dust and keep the work area clean
- Work Gloves Unspecified — Protecting hands during sanding and coating application