Install Remaining Baseboard Sections and Secure Joints
At 0:08 in
Game changing wood trim glue! CA glue for perfect seams that won’t crack. #caglue #woodtrimhack
What happens here
Continue the installation by applying Titebond Heavy Duty Construction Adhesive to additional pre-cut baseboard sections and fitting them into their respective places around the corner/step. Ensure all mitered joints are tight and flush. For an instant and strong bond at critical mitered joints, apply a small amount of super glue (CA glue) and then spray it with an activator spray to cure it rapidly. This provides immediate hold and enhances joint strength. While not explicitly shown in action for these specific pieces, a Ridgid nail gun is visible in the work area, suggesting that finish nails can be used for supplementary fastening to provide additional structural integrity while the adhesive dries. Meticulously wipe away any excess adhesive that squeezes out from the joints or edges with a clean rag or cloth.
Goal: Complete the baseboard installation around the intricate corner/step.
Tools and materials
- Activator Spray — Rapidly curing super glue
- Caulk Gun — Dispensing construction adhesive
- Nail Gun Ridgid — Supplementary fastening of baseboards to the wall
- Pre-cut Baseboard Pieces — Trimming the corner and wall sections
- Rag or Cloth — Wiping away excess adhesive
- Super Glue — Providing an instant bond for mitered joints
- Work Gloves Flexiflex — Protecting hands from adhesive and keeping them clean