Skip to main content
Stesso

Connect Second Pipe Section and Clamp

0:28
1:01
18.7K views

At 0:28 in

Funny Pipe Repair Coupling for a Quick Sprinkler Pipe Fix! #diy #plumber #helpingothers

Watch on YouTube

What happens here

Once the first end is securely attached, the second severed end of the polyethylene sprinkler pipe is brought into alignment with the remaining open side of the blue repair coupling. This second pipe end is then also carefully screwed onto the coupling, effectively creating a continuous pipeline. To reinforce these connections and ensure a completely watertight seal under pressure, a hose clamp is positioned over each connection point where the coupling meets the pipe. A nut driver is utilized to firmly tighten these hose clamps, though a standard flat-head screwdriver could also be used if a nut driver is unavailable.

Goal: Fully connect the repair coupling and secure both ends with hose clamps for a watertight seal

Tools and materials

  • Funny Repair Coupling Apollo — Connecting severed sprinkler line
  • Hose Clamps — Securing the connection between the coupling and the pipe to prevent leaks
  • Nut Driver — Tightening the hose clamps
  • Polyethylene Sprinkler Pipe — The pipe being repaired

What they say

Hide

it's funny i kind of think the other side would be easier there's some little nubs right on here that will allow you to spin this so we'll get it twisted in the whole length of the barb and start twisting this side in it's either a screwdriver and nut driver nut driver works out a little bit better all right pop in here this rain bird box zone six is off we'll turn it on but we're getting wet from the sprinkler head we're good to rock and roll waters back on

Auto-generated from the video audio.