Skip to main content
Stesso

Test for Leaks and Verify Drainage

5:50
6:38
4.1K views

At 5:50 in

Fixing A Leaky Bathroom Sink Drain: Easy Diy Tips For Poor Design And Clog

Watch on YouTube

What happens here

Turn on the sink faucet to a strong flow and fill the sink completely. Observe the drainage speed; it should now drain quickly without backing up. While the water is draining, carefully inspect all the newly installed connections under the sink for any signs of leaks. The video suggests filling and draining the sink several times to ensure all air is purged from the system and to thoroughly test the connections. As a precautionary measure, leave a paper towel or small bowl under the P-trap for a couple of days to detect any slow, unnoticed drips.

Goal: Finally, the new installation is tested by running water in the sink multiple times, observing the drainage speed, and meticulously checking all connections for any leaks.

Tools and materials

  • Rubber Gloves
  • Bowl
  • Paper Towels

What they say

Hide

tight turn on the water and we're going to start filling and draining we've got this completely filled up right now water is going down the Overflow we're going to give this a fullon test we're going to let this run for a little bit make sure the Overflow is not clogged and I'm going to fill and drain this several times oh yeah that sounds great it's not stopping like it used to and it went the whole way down all right so there we go everything looks good everything's dry and per the usual I like to leave something under the trap to check for a drip they already had this bowl here so I just put some paper towel underneath it as well and just said hey just check it for a couple of days make sure it's good then you can put your stuff back

Auto-generated from the video audio.