Reassemble Faucet Handle Components

it right down in there make sure you get your retainer ring here all nice and cleaned up for your debris it's pretty tight I'm just going to give a little snug a look with the Jaws when I put this cartridge down there I was trying to keep it right like this but it cocked a little bit to that side it's gonna be okay watch get this down on there it only fits one way and make sure that it's turned to the closed position you can see that's how that rolls so if I show you on the old one it's only going to fit down like so okay it only fits one way it doesn't go there it doesn't go there it really only goes one way so no matter where it's at you want it to be right up next to that piece if you're turning clockwise that's going to be off tighten that down here's the nice thing about all these splines right here this actually is like for a good micro adjusting right it's going to allow us even though that cartridge is not straight it's going to allow us to put this on straight and it's still going to work exactly where it needs to that's the nice thing about this you know that was a little bit in there a little bit different doesn't matter so if you look at that that's actually straight on there and now you can just take this tighten it down