Work and Flatten Edges

don't over trowel all right tip number five is and this is very important and it's working your edges so i'm gonna get my manageable area get it random rolled on very important that you random roll and now it's important to hit your edges and not leave these edges left with any type of stippling especially if you're going to come back and not finish this job and you're going to finish it later on because one of the great things about bowero finishes is you can i can stop right here i can come back and start on this section right here and you're not going to see a difference from starting and stopping but you will if you don't hit these edges lock these edges down if you come back later there's going to be stiff lane stippling and it's going to be rough and these edges actually dry quicker than the center because there's more product on the edges so i definitely want to hit my edges and not allow these edges to dry and stipple so work these edges hit them flatten them out knock them down before they dry one of the you know great things about this product is once again you can start and stop you know your project right in the middle of the project and come back later that's with bow arrow coatings um that may not necessarily be true with some of the other coatings out there but it is with bower it's great now i'm just because of demonstration purposes in this video i started right here in the middle in the middle because the cameras are focused right here but typically what i'm going to start is i'm going to start from probably an edge i'm going to start from this corner work my way down and work my way across this wall um it's not as critical with bowero coatings you can really start anywhere but it's really good practice just start on at one end and work your way across the wall and i like to work my way from top down too so i'm going to come down and across this wall tip number six is keeping a wet rag with