Install Screw-in Insulators on Metal Posts

What happens here

Using a Milwaukee cordless drill equipped with a magnetic chuck, insert a self-tapping screw through a white plastic screw-in insulator. Position the insulator against a metal T-post on the existing woven wire fence. Drive the screw into the post, being careful not to overtighten. The goal is for the insulator to be snug but not so tight that it cracks the plastic. The presenter notes that this method is a temporary solution for the metal posts, and a high-tensile wire will be installed later in the winter for a more permanent setup.

Goal: Securely attach insulators to metal T-posts for the hot wire.