Connecting Front Loader to Ventrac

counterweight pretty cool [Music] [Applause] here's no other way of saying this other than this thing is just cool so there's a belt drive system that runs all the implements on the front of the ventrac the ventrac basically pulls into here you hook up the belt you attach a few little latches and it's fully self-contained in other words there's a hydraulic tank in here that the belt on the ventrac spins this thing is fully self-contained with the pto just like you'd be running a mowing deck so you don't have to contend with this thing contaminating the hydraulic fluid on the machine let's hook up [Music] there's a little tab right here basically just put that tap down and it catches the loader we tighten that tab and our loader is all hooked up ready to rock and roll there's one of these on each side and then the belt system the John Deere has a pin system to release its bucket and this has a whole different set up it's pretty cool now we've got it ready we'll fire up the tractor and we'll engage the pto real quick so here goes