Skip to main content
Stesso

Apply Clear Coat: Cut-ins and Rolling

3:34
7:26
249.2K views

At 3:34 in

Epoxy Floor Clear Coat Application. Garage Floor Epoxy Instructions. DIY Concrete coatings.

Watch on YouTube

What happens here

Begin the clear coat application. One person should perform the 'cut-ins' by carefully applying the clear coat with a brush along the perimeter, walls, and any obstacles. Simultaneously, another person or the same person, if working alone, should roll the main floor area using the roller with the 1/4 inch mohair nap and extension pole. Ensure smooth and even coverage, working systematically from the back of the garage towards your designated exit.

Goal: Apply a uniform layer of clear coat across the entire garage floor.

Tools and materials

  • Brush — Applying clear coat for cut-ins
  • Extension Pole — Extending the reach of the roller
  • Roller with 1/4 inch Mohair Nap Wooster — Applying clear coat to the main floor
  • Mixed Armour Seal Clear Coat Armour Seal — The coating being applied

What they say

Hide

of the answer. So, just a few tips when you're applying this clear coat is since it is clear, it's really hard to tell where you've gone, but you want to make sure that you get a good nice uh thin coat over the entire floor. So, you got to get like in the proper lighting and make sure you can look and see. You'll see where you go if you look close enough and get a nice reflection off the floor by looking at certain angles. But just make sure you get that clear coat over the whole floor and get a good layout.

Auto-generated from the video audio.