Skip to main content
Stesso

Mount and Test New Doorbell

0:29
0:46
26K views

At 0:29 in

Electrician Service Call, Come with me and Replace a Doorbell, what it looks like, Thoughts?

Watch on YouTube

What happens here

With the wires securely connected, the installer carefully pushes the new doorbell button into the opening on the door frame. He then uses the Phillips head screwdriver to secure it in place with the two mounting screws. Finally, he tests the doorbell by pressing the button to ensure it activates the chime inside the house, confirming a successful installation.

Goal: Secure the new doorbell button to the door frame and verify its operation.

Tools and materials

  • New Doorbell Button — The installed doorbell unit
  • Phillips Head Screwdriver — To secure the mounting screws of the new doorbell

What they say

Hide

There are only two wires on a doorbell with two screw terminals. Typically, one red wire and one white wire. I'm doing this live. It doesn't matter which terminal each wire goes on. You can put them anywhere and it'll still work. These wires are tiny 18-gauge carrying 12 volts. Not enough power to get zapped, so no need to turn off the power. And boom, we just finished. They not like us and they not like us. I put my tools away, customer satisfied. He even gave a $25 tip. I put that right in my pocket and that is what a day looks like as an electrician.

Auto-generated from the video audio.