Install Conduit and Terminate Charger
At 4:11 in
ELECTRICIAN INSTALLS CAR CHARGER FOR CUSTOMER AND THIS HAPPENED!
What happens here
In the garage, install 3/4-inch EMT (Electrical Metallic Tubing) conduit from the point where the wire enters the garage to the location where the ChargePoint EV charger will be mounted. Secure the conduit to the wall using appropriate clamps. Once the conduit is in place, feed the 6-gauge electrical wire through the conduit. Finally, mount the ChargePoint EV charger to the wall and terminate the electrical connections inside the charger unit, ensuring the hot and ground wires are correctly connected according to the manufacturer's instructions. The installer demonstrates the completed wiring inside the ChargePoint unit.
Goal: Connect the EV charger to the electrical system in the garage
Tools and materials
- 3/4-inch EMT Conduit — Protecting the electrical wire in the garage
- ChargePoint EV Charger ChargePoint — The primary equipment to be installed
- Conduit Benders — Bending EMT conduit to navigate corners
- Conduit Straps/Clamps — Securing the conduit to the wall
- Screwdriver Set — Mounting the charger and terminating wires
- Wire Fish Tape — Pulling electrical wires through the conduit
What they say
(947 characters)Hide
What they say
(947 characters)Auto-generated from the video audio.