Initial Problem Assessment and Panel Specification Review

0:02

1:40

164.3K views

At 0:02 in

Electrician Dad and Son Try to Troubleshoot why a 480 Volt Circuit Breaker was Arcing, Thoughts?

Watch on YouTube

What happens here

The video begins with an electrician approaching a large industrial electrical panel, noting a problem with a specific circuit breaker labeled 'DFU-3'. The report indicates this breaker is making 'snap, crackle, and pop sounds,' which are indicative of an arcing fault. The electrician then points out a 'SPARE' breaker directly above the faulty one. Next, the electrician highlights the panel's specifications by showing a Siemens label, identifying it as a 3-phase, 4-wire system with a 480Y/277V rating. He details that different sections of the switchboard are rated at various amperages (e.g., 3000A, 4000A mains, 2500A sections). He also points out a section specifically added for a UPS (Uninterruptible Power Supply). This initial assessment is crucial for understanding the system's design and potential hazards.

Goal: Understand the electrical panel's characteristics and identify the problematic circuit breaker.

Tools and materials

Circuit Breaker — The specific breaker identified as making arcing noises
Panel Labels Siemens — Providing critical information about the system's voltage, amperage ratings, and configuration
Siemens Electrical Switchboard Siemens — The main electrical distribution panel being investigated

What they say

(826 characters)

Hide

Hey, so here's the problem. The problem is with this breaker here, he's telling me he's making snap, crackle, and pop sounds. >> Yeah. Says he has a breaker right above it that's a spare. Let's open up this side. This is a P4 panel. >> Yep. So, we got to take this cover off. Yep. This cover off so that we can get in and take this whole dead front off. Look at it. This is a three-phase, four-wire, and this this section is rated at 3,000 amps and it's fed with a 4,000 amp main. So, over here is a 4,000 amp rated You can see, Chris, that this is a section. Yep. This is rated at 4,000 amps. If we go over to this section, this section's rated at 2,500. We go to this section, it's rated at 3,000, 3,000, 2,500, and 2,500. Now, you can see that this was added. This is for the UPS. This one was added. I remember

Auto-generated from the video audio.