Spot Priming with Vinyl Sealer

go. Ready to load this thing up and start spraying. All right, we got one of the things we're working on is this is a shelf right here, kind of like a shoe rack type shelf. We're getting initial sand on it. We're using our three by four sander using 320 grit film tech right here for our flat surfaces. Then we're also using a 10 millimeter very fine sponge to hit the rounded surfaces and edges right here. I do got a spot. There's this is a wood piece of furniture and there was a piece of oil or grease. I'm just going to be using CIC's vinyl sealer right here. So this vinyl sealer or like a bin type shellac bin one two three shellac primer will actually help seal that too. If you run if I ever run into any type of contamination issues, fisheye issues, I'm typically going to be using a spray can of bomb of either centurions vinyl sealer or bin one two three. This is CS a 1006 from centurion. So I'm just going to spray that get that nice and coated that little oil spot right there. Now that'll be sealed and locked in there. All right, we're getting done with our first coat just about and this is going to be our