Skip to main content
Stesso

Remove Old Valve Internals and Clean

0:23
0:59
566.1K views

At 0:23 in

Easy Fix For Hose Bib That Has A Built In Vacuum Breaker! #diy #helpingothers #plumbing

Watch on YouTube

What happens here

After removing the cap, take out the remaining internal components: the plunger and the O-ring seal. Inspect the spigot housing to ensure it's clear of any debris or broken pieces before installing the new parts.

Goal: Clear out the old valve components and prepare the housing.

What they say

Hide

little anti-siphon silcock valve for the vacuum breaker, and really it's going to pretty much be a direct replacement right here. Grab something here to take this out. Very simple. It's just got really these two little pieces with the O-ring and the little gasket. Look down inside here, nothing else. It's cleaned out. This little piece right here, just set that right down on the top with the gasket facing up. So this piece screws out. Check this out. These are the same.

Auto-generated from the video audio.