Skip to main content
Stesso

Install New Valve Components

0:33
0:59
566.1K views

At 0:33 in

Easy Fix For Hose Bib That Has A Built In Vacuum Breaker! #diy #helpingothers #plumbing

Watch on YouTube

What happens here

Take the new plunger piece from the repair kit and place it into the valve housing, ensuring the small gasket on it is facing up. Then, take the new cap and screw it onto the spigot body by hand.

Goal: Install the new plunger and cap from the repair kit.

What they say

Hide

really these two little pieces with the O-ring and the little gasket. Look down inside here, nothing else. It's cleaned out. This little piece right here, just set that right down on the top with the gasket facing up. So this piece screws out. Check this out. These are the same. This actually has a place to turn it. Pretty much can just go hand tight and it's going to be fine. Just hit it just to snug it up just a little bit. So that's it. It's not leaking.

Auto-generated from the video audio.