Skip to main content
Stesso

Pouring the First Metallic Epoxy Layer

0:05
1:07
37.9K views

At 0:05 in

Easy epoxy floors anyone can do! #epoxy #garagefloors #epoxyfloor #metallicfloor #floorideas

Watch on YouTube

What happens here

After the floor has been prepped by sanding and presumably cleaned (though not shown), the first layer of metallic epoxy is applied. In the video, this involves pouring a white metallic epoxy directly from a bucket onto the existing black epoxy floor. The epoxy is poured in large, free-form sections, beginning to lay down the base for the decorative, marbled pattern. The person applying the epoxy is wearing spiked shoes to allow walking on the wet surface without disturbing the finish.

Goal: Establish the primary base color and initial pattern of the metallic floor.

Tools and materials

  • Bucket Unspecified — Holding and pouring the mixed metallic epoxy
  • Spiked Shoes Unspecified — Allowing movement on the wet epoxy surface without leaving marks
  • White Metallic Epoxy — Creating the base color and initial metallic effect of the floor

What they say

Hide

So, I'm going to show you doing epoxy metallic floor. I'm getting ready to um do the pour out of the metallic. I'm going to show you um kind of a simple way to, you know, sand the floor to get it ready to um do our pour out. So, you know, if you're new to epoxy floors, if you don't have access to all the expensive equipment, swing um swing machines, etc. to do the sanding upright. You know, if you're a painter

Auto-generated from the video audio.