Skip to main content
Stesso

Introduction and Floor Preparation Explanation

0:02
1:07
37.9K views

At 0:02 in

Easy epoxy floors anyone can do! #epoxy #garagefloors #epoxyfloor #metallicfloor #floorideas

Watch on YouTube

What happens here

The video starts with the presenter introducing the project: applying an epoxy metallic floor. He outlines the first critical step, which is preparing the existing floor by sanding it. He specifically highlights that expensive, specialized equipment like "swing machines" or large upright sanders are not always necessary. Instead, he demonstrates and explains how a common 5-inch or 6-inch random orbital sander (like an Echisan) fitted with a 120-grit Filmtech plastic abrasive disc can effectively prepare the surface. The purpose of this sanding is to remove any existing imperfections, bubbles, or debris from the current epoxy coating, creating a proper profile for the new metallic epoxy to adhere to. He estimates this sanding process takes about 30 to 40 minutes for a three-car garage. While speaking, he briefly shows himself sanding the floor.

Goal: Understand the purpose and method of floor preparation using accessible tools.

Tools and materials

  • Knee Pads Unspecified — Protecting knees while working on the floor
  • Random Orbital Sander Echisan — Sanding the existing epoxy floor to create a proper profile for new adhesion
  • Respirator Unspecified — Protecting against airborne dust from sanding and fumes from epoxy
  • Safety Gloves Unspecified — Protecting hands from abrasion during sanding and chemical contact during epoxy application
  • Filmtech Plastic Abrasive Filmtech — The abrasive material for the random orbital sander, used to scuff and prepare the existing epoxy surface

What they say

Hide

So, I'm going to show you doing epoxy metallic floor. I'm getting ready to um do the pour out of the metallic. I'm going to show you um kind of a simple way to, you know, sand the floor to get it ready to um do our pour out. So, you know, if you're new to epoxy floors, if you don't have access to all the expensive equipment, swing um swing machines, etc. to do the sanding upright. You know, if you're a painter and you have an Echisan 6-in sander or 5-in sander, all you need is some Film Tech Filmtech, you know, plastic abrasive, 120 abrasive, and you can sand your floors with an Echoan sander. This is what I'm using. It's only going to take me, you know, probably 30 to 40 minutes to do this uh threecar garage. So, you don't need all the fancy elaborate equipment that that the big epoxy floor companies have. If you're a painter starting out a business, this is all you need, you know, to uh do the prep process. I'm sanding out any

Auto-generated from the video audio.