Skip to main content
Stesso

Measure and Mark Cut Line

0:32
0:58
44.9K views

At 0:32 in

Easiest Way To Cut Downspout Drain Pipe? #diy #drainage #milwaukee #diytools

Watch on YouTube

What happens here

A tape measure and pencil are used to mark the precise location where the downspout needs to be cut. To ensure a perfectly straight line, a piece of blue painter's tape is carefully wrapped around the downspout, aligning its edges to create a clear guide for the cutting tool. This method helps achieve a clean, professional-looking edge.

Goal: The downspout is measured to the desired length, and a strip of painter's tape is applied around it to create a straight and visible guide for the subsequent cut.

Tools and materials

  • Downspout — The downspout section to be cut
  • Pencil — Marking the measurement on the downspout
  • Tape Measure — Measuring the desired length for the downspout cut
  • Painter's Tape — Creating a straight and visible cutting guide on the downspout

What they say

Hide

after that cuts are a little bit sketchy so I pulled out my new 3-in cut off tool by Milwaukee this is by far the nicest and easiest Cuts I have found give myself a measurement so I just use masking tape to do this just get it as straight as you can and then that right there just lines up with the rest so and now you just follow that line for a [Music] cut pretty much straight you get it all filed up pop this bad boy up in

Auto-generated from the video audio.