Install Radius Standing Seam Metal Panels
0:42
17:43
18.5K views
At 0:42 in
Dream Outdoor Kitchen Build...Ideas fir outdoor kitchen, gazebo or deck!
What happens here
Install the red standing seam metal panels onto the radius roof section. These panels are custom-built to match the curve of the roof. They are installed using hidden clips and brackets that interlock, meaning there are no exposed fasteners on the roof surface. Once the panels are in place, the edges are meticulously trimmed and rolled underneath using specialized tools, creating a clean, seamless, and weather-tight finish. This specialized metal and installation method is essential for curved roofs.
Goal: Cover the radius roof with custom-bent, fastener-free metal panels
Tools and materials
- Drill — Securing hidden clips to the roof decking
- Hand Crimpers/Rollers — Rolling the edges of the metal panels underneath for a clean finish
- Metal Snips — Trimming excess metal from the panels
- Safety Harness — Protecting workers from falls during roof installation
- Screws — Securing hidden clips (not directly exposed)
- Hidden Clips/Brackets — Securing standing seam panels without exposed fasteners