Design and Cut Wooden Components
At 0:05 in
Don’t waste your money on tools! #tools #construction #bluecollar #trailer
What happens here
Based on the measurements taken, design the wooden holders. The video shows two distinct designs: one for a framing square that slides vertically into a C-shaped holder, and another for a T-square that slides horizontally into a T-shaped slot or ledge. Using a miter saw or circular saw, precisely cut the wooden pieces (e.g., from plywood scraps or a common board like a 1x4 or 1x6) to the required lengths and widths for the backing and front/bottom components of each holder. For creating the specific slots, a jigsaw might be necessary for intricate cuts, or a router for clean dados.
Goal: Prepare all wooden pieces for the tool holders.
Tools and materials
- Hearing Protection — Ear protection during cutting
- Jigsaw — Cutting specific slots or curves if the design requires it
- Measuring Tape — Measuring cuts
- Miter Saw — Cutting wooden pieces to length and width
- Pencil — Marking cut lines
- Router — Creating precise dadoes or rebates for slots
- Safety Glasses — Eye protection during cutting
- Wood — Building the tool holders
What they say
(94 characters)Hide
What they say
(94 characters)Auto-generated from the video audio.